THB-1 : 67 CAD

Noah'sark THB -1 is the through box which can be made to perform extraction and insertion and connection of a plug in one place by summarizing IN/OUT of an effect board underfoot to one place. By apparatus, input and output with various directions and form can be unified, and the inside of a board can be felt refreshed. Moreover, since not only an audio signal but a latch signal and a MOMENTARI signals are supported, it can use also as those relays.

- The name and function of each part   [Jack] -IN : Input terminal. A guitar etc. is an input jack from a musical instrument. The direction of the flow of a signal was decided by only this jack. Be sure to use it towards the flow of a signal flowing from a metal jack to a plastic jack. * Keep in mind that use of this product only in jacks other than IN jack causes a noise since the ground of a case is taken by this jack.

- ABC : A signal is sent to the ABC terminal which is in a contrary side, respectively. There is no directivity in the terminal of ABC like IN jack.    SIZE:W110xH30xD58(mm) Projection things, such as * switch and a jack, are not included.

NOAHSARK ABC-1

(A/B SELECT&CTL SW)

 ABC-1 : 67 CAD

Noah'sark ABC -1 is a passive type A/B selector + latch control switch. Play ability was raised more by putting side by side the control switch changing in ON/OFF arbitrarily changed with compact size if needed in two sets of amplifier etc., such as a channel of not only an A/B selector function but amplifier, and Reverb.

- The name and function of each part   [Jack] -IN : Input terminal. A guitar etc. is an input jack from a musical instrument. - OUT A:  Output terminal A. Please tie to the input of the apparatus (amplifier, an effector, tuner, etc.) to connect. - OUT B: Output terminal B. Please tie to the input of the apparatus which another side connects.

- CTL: Latch type terminal for control. It is used in case ON/OFF of channels, such as amplifier, or Reverb is changed (please confirm the instructions manual of the apparatus to            connect about use). [Switch] -A/B: Whenever it pushes a switch, Outputs A and B are changed.

- CTL: Whenever it pushes a switch, the channel and ON/OFF of the apparatus linked to a CTL jack are changed. SIZE:W110xH30xD58(mm) Projection things, such as * switch and a jack, are not included.