1. Steady

ii- PTBS-1

ii- TBSW Series

ii- Switcher Series

4. Medeli

ii- Electronic Drum

ii- Practice Pad

ii- Drum Mat

ii- Stick Bag

6. Fzone

7. Blowitfans

NoahSARK

TBSW  True Bypass Switcher With Buffer

Degradation signal will be raised when you use two or more effectors. To eliminate it, the loop & buffers are narrowed down to minimum and simple size. 3PDT SW is essential to a True Bypass circuit. 3PDT SW prevent degradation signal produced by the increase of the number of loops although it is called True Bypass. We make low price even though using a high tone quality buffer circuits.

"Amplifier -- Direct sound from amps is the best however, player want to use two or more compact effectors -- NoahsARK TBSW series are essential for guitarist. The guitarist also likes direct bypass sound of a compact effectors. The bypass type of effectors are increased in recent years, and the effectors which using quality True Bypass SW has also increased. However, although it is called "True Bypass" when the signal pass in-series or two or more sets are connected, a bypass signal will be deteriorated by passing many contact points. Most of bypass signal pass along the circuit. There are still sound deterioration problem.  Considering 3PDT SW and a high-quality sound buffer circuit were used for the True Bypass circuit, the price is very low. The size is fit for the effect board and operation, stability and intensity were also adopted. The 1.6-mm-thick griddle and 4 in width are adopted as a body. "TBSW-1 are equipped with five loops and tuner out & Mute switch. The body extracted to the limit with play ability maintained, "TBSW-2" which equipped the compact body with two loops and tuner out & Mute switch.

-IN input terminal. A guitar etc. input jack from a musical instrument.

- The Send terminal of SEND (1-5) each loop. It ties to the input of the apparatus to connect.

- The return terminal of RET (1-5) each loop. It ties to the output of the apparatus to connect.

- TUNER OUT tuner out terminal. TBSW-1 and TBSW-2 are equipped. From this terminal, the signal is always outputted.

- OUT output terminal. It is a jack for an output to amplifier etc.

- DC9V adapter terminal. Since this product carries LED and a buffer circuit, a power supply is required for it. Please use optional

  9V AC/DC adaptor, connecting.

* Specification Outside size: W420×H49×D80(mm) Weight: 1690g Source: Option AC/DC adaptor (DC9V AC/DC-1 grade and V type

   of a center minus pin)

TBSW-2   2 LOOP&MUTE SW w/TUNER OUT                                   Retail: 234.00 CAD

- LOOP (1-2) loop switch. 3PDT SW is used for a True Bypass circuit. If this switch is pushed, LED (red) will light up, and the loop

  connected to SEND/RET (Send/return) corresponding to that number is turned on. If it pushes once again, LED will put out the light

  and a loop will be turned off.

- MUTE If this switch is pushed and it turns ON, LED (blue) will light up and the output of the signal from an OUT terminal will be interrupted.

  If it pushes once again, LED will put out the light and a MUTE function will be turned off. Since the signal is always outputted thru the

  TUNER OUT terminal, it is tunable when output is on this MUTE function.

Size : W210xH49xD80(mm) Weight: 890g Source: Option AC/DC adaptor (DC9V and V type of a center minus pin)

TBSW-3     3 LOOP                                                            Retail: 234.00 CAD

- LOOP (1-3) loop switch. 3PDT SW is used for a True Bypass circuit. If this switch is pushed, LED (red) will light up, and the loop connected to SEND/RET (Send/return) corresponding to that number is turned on. If it pushes once again, LED will put out the light and a loop will be turned off.

TBSW-4  2 LOOP & 1 CTL                                                      Retail: 234.00 CAD

- LOOP (1-2) loop switch. 3PDT SW is used for a True Bypass circuit. If this switch is pushed, LED (red) will light up, and the loop connected to SEND/RET (Send/return) corresponding to that number is turned on. If it pushes once again, LED will put out the light and a loop will be turned off.

- CTL control switch. If this switch is pushed and it turns ON, LED (green) will light up and ON/OFF of channels, such as amplifier, or Reverb will be changed (latch type). If it pushes once again, LED will be out and it will change to the original status. Please confirm the instructions manual of the apparatus to connect about use.